Metallic key, for height 1000 mm and above. Gland plate(s) with gasket(s), plastic double-bit 3 mm key, and mounting accessories. For height 600 mm and above, two MMDP door mounting profiles. Sealing is ensured by an injected one piece polyurethane gasket.Įnclosure with door and mounting plate (not included for item numbers ending with PER5). Inner M6 welded studs to mount door profiles MMDP, see delivery. Hinges can be mounted to allow left or right hand opening.

Concealed removable hinges with captive pin. Other inserts are available as an accessory. Espagnolette three point locking for 1000 mm high enclosures and above. Two locks for 600 mm high to 800 mm high enclosures. NVent HOFFMAN customized double-bit 3 mm lock, with 90° movement and anti-vibration mechanism. Door: 1.2 mm mild steel / 1.5 mm for enclosures with a height or width of 500 mm or greater / 2 mm for enclosures with a height or width of 800 mm or greater. By using the AMG accessory, the mounting plate position can be adjusted to any depth.īody: 1.2 mm mild steel for enclosures with a depth of 155 mm / 1.4 mm for enclosures with a depth of 210 or 260 mm / 1.5 mm for enclosures with a depth of 300 or 400 mm, or if a height or width is 1000 mm or greater. All sides, from 800 mm and above, are strengthened by folded edges.

Fixed onto M8 press welded studs to the rear of the enclosure. On the top and bottom there are holes to facilitate cable fixing. The mounting plate is marked vertically at 10 mm intervals, for easy horizontal positioning of equipment. Resistance to corrosion must be taken into consideration for outdoor and indoor applications. For outdoor installation, the use of a rain Hood, ARF, and 100% polyester paint coating plus corrosion protection primer is recommended. Situated at the far rear of the enclosure, to make cabling onto the mounting plate easier.Ĭomplies with IP 66 | TYPE 4, 12 | IK 10. Four 8.5 mm diameter holes for wall fixing, pressed out in 20.4 mm diameter × 2 mm depressions, to allow air circulation around the rear part of the enclosure.

Creo parametric 3d